TAMA12 filter

Tama12 is a very flexible and second order 12db active filter based in OTA full of character with output amplification stage. It has two control knobs. One for the cutoff frequency, one for the resonance and a CV input for controlling the cutoff frequency.

It works with +-12V and the size is 8 HP.

Comes with eurorack power cable, user’s manual and M3 screws.

-------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Tama12 is our unique active low pass filter. A very flexible second order 12db filter based in OTA, rich of harmonics, with powerful resonance. The interface is pretty straight forward. Two control knobs, one for the cut-off frequency, one for the resonance and a CV input that controls the cut-off frequency.

In the back side of the module you can find 4 trimmers. Those trimmers gives to the user the ability of controlling and customise the filters behaviour:

A. The input signal level, in order to avoid overdriving the filter and achieve minimum distortion. Or overdrive it to unlock the secret harmonics of the most aggressive filter you ever had.
B. The end point of the cut-off knob, in order to control the amount of frequencies that can pass with the cut-off knob completely closed and customise your cutoff knob behaviour.
C. The CV input range, in order to control the high – low frequency limits.
D. Output signal level for I/o levelling matching or more aggressiveness and distortion.

Tama12 works with +-12V and the size of the module is 8 HP.

Comes with eurorack power cable, user’s manual and M3 screws.

https://www.youtube.com/watch?v=gplRUxPRJuE